1:18 APM full-kit 250 GT "Breadvan"

Toutes Echelles 1/12 1/18 1/43 ect etc
Avions ..Bateaux... Autos ....Diorama

Modérateurs: Antoine, Xaneaze

1:18 APM full-kit 250 GT "Breadvan"
GTO62 Hors ligne


Avatar de l’utilisateur
 
Messages: 249
Inscription: Lun 29 Sep 2014 22:55
Localisation: Montfoort / Netherlands

Messagede GTO62 » Mar 30 Sep 2014 00:33

A while ago I finished this kit and I like to share some photo's with you of the build and the finished model.

All the resin is very clean and no air bubbles, the line this model is one of the finest I have seen of a Breadvan.
What is in the box:

Image

Image

One chair was missing, but I used the chairs from a 250 GTO of Kyosho.

Image

Wire wheels are spare parts from my own, but after all, I only used the brakes!

Image

Image

Image

After cleaning and sanding the first priming:

Image

Image

A little bit filler:

Image

And then I discovered APM has forgotten to make some holes in the body.
So I carved them in by my self.

Image

Image

Colour and varnish:

Image

Image

During drying time of the body, I began with the interior:

Image

Image

Image

In the interior I used parts of other brands: steering wheel and chairs from Kyosho 250 GTO, seatbelts from MFH and some parts of Tremonia, SMS, Legende Miniatures, Hobby Design and Red Run.

Image

Tyres are from Kyosho 250 GTO and wire wheels are from BBR.
To fit the tyres I had to widened the wire wheels.

Image

The brakes of APM were not correct, so I changed them a little bit to fit the wheels.

Image

Image

Image

Image

In mean while I polished the body and painted the inside.

Image

Image

Image

Now we can finish the rest of the body:

Image

Image

Image

Image

Image

When the exterior is finished, we can build in the interior and the rest:

Image

Image

And then, on a beautiful sunny day, it was time for the final pictures:

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image


I hope you liked the build and the final result.
Thanks for watching! :)

John


Dark Hors ligne


Avatar de l’utilisateur
 
Messages: 23262
Inscription: Mar 31 Mai 2011 22:30

Messagede Dark » Mar 30 Sep 2014 05:44

A very mature and professionnal building.......

Paint and caved traps.. :: :roll:

This kit is very good quality conception

But is réalisation is very délicat

I think about the glass...for exemple

Congratulations John


Antoine Hors ligne


Avatar de l’utilisateur
 
Messages: 7233
Inscription: Sam 10 Déc 2011 14:51
Localisation: Provence Alpes Côte d'Azur

Messagede Antoine » Mar 30 Sep 2014 18:46

In french : finition exemplaire !
Antoine. L'homme est la pièce rapportée de la Nature : il passe son temps à mesurer...


Scuderia57 Hors ligne


Avatar de l’utilisateur
 
Messages: 2338
Inscription: Sam 22 Fév 2014 18:59

Messagede Scuderia57 » Mar 30 Sep 2014 19:41

Antoine a écrit:
In french : finition exemplaire !



+1 ;)
WORLD IN RED!


Xaneaze Hors ligne


Avatar de l’utilisateur
 
Messages: 6911
Inscription: Mer 21 Sep 2011 14:32
Localisation: Chambéry

Messagede Xaneaze » Mar 30 Sep 2014 19:51

Great and terrific !!
Very fine work ;)
This is not modelling but jewelry ;)
"Un palmarès se construit sur la passion des autres, on dépend de l'anonymat et de la passion partagée d'une écurie...." Jacky Ickx


GTO62 Hors ligne


Avatar de l’utilisateur
 
Messages: 249
Inscription: Lun 29 Sep 2014 22:55
Localisation: Montfoort / Netherlands

Messagede GTO62 » Mar 30 Sep 2014 22:54

Thank you guys! :)
It's always take a lot of time and patience to build a nice model.
One of the most important things is dry-fitting, but I think the most builders know that.

The kit was very nice, smooth resin and good quality PE-material.
But there are always some parts in different kits from APM, witch are not so good.
In most kits of APM the wheels or tyres are to small, I am always searching for a solution.
In this kit there were a few parts I did not like, so I used a lot of parts of a 250 GTO from Kyosho.
And sometimes you must make the parts by yourself.

John


Dark Hors ligne


Avatar de l’utilisateur
 
Messages: 23262
Inscription: Mar 31 Mai 2011 22:30

Messagede Dark » Mer 1 Oct 2014 03:01

Dry fitting :?:


GTO62 Hors ligne


Avatar de l’utilisateur
 
Messages: 249
Inscription: Lun 29 Sep 2014 22:55
Localisation: Montfoort / Netherlands

Messagede GTO62 » Mer 1 Oct 2014 08:53

Dark a écrit:
Dry fitting :?:


To put everything together before you going to paint or glue. ;)


ayrton83 Hors ligne


Avatar de l’utilisateur
 
Messages: 2912
Inscription: Sam 12 Mai 2012 08:08
Localisation: Draguignan var 83

Messagede ayrton83 » Mer 1 Oct 2014 19:14

John fantastic job. zero defaults, you're very talented ;)
FORZA FERRARI


Dark Hors ligne


Avatar de l’utilisateur
 
Messages: 23262
Inscription: Mar 31 Mai 2011 22:30

Messagede Dark » Jeu 2 Oct 2014 05:52

GTO62 a écrit:
Dark a écrit:
Dry fitting :?:


To put everything together before you going to paint or glue. ;)




Ok ......ok....thx ... ;)


stef17 Hors ligne

 
Messages: 35
Inscription: Mar 21 Oct 2014 16:04

Messagede stef17 » Dim 23 Nov 2014 20:50

What a beautifull model :!: and you have done it with a great talent I'm fan of your job :D

A+
Stéfan


b12cky Hors ligne


Avatar de l’utilisateur
 
Messages: 535
Inscription: Lun 24 Fév 2014 21:54

Messagede b12cky » Mer 10 Déc 2014 21:24

Fantastic job!


Chris06 Hors ligne


Avatar de l’utilisateur
 
Messages: 5994
Inscription: Mar 1 Jan 2013 23:28

Messagede Chris06 » Mer 10 Déc 2014 22:00

b12cky a écrit:
Fantastic job!


I like this...!

Image
Envoyer depuis mon ail faune

Sur Instagram : chriszerosix


Xaneaze Hors ligne


Avatar de l’utilisateur
 
Messages: 6911
Inscription: Mer 21 Sep 2011 14:32
Localisation: Chambéry

Messagede Xaneaze » Jeu 11 Déc 2014 22:21

Chris06 a écrit:
b12cky a écrit:
Fantastic job!


I like this...!

Image


hum that's the way, I like it !! 8-) 8-)
https://www.youtube.com/watch?v=83I9El6C47A
"Un palmarès se construit sur la passion des autres, on dépend de l'anonymat et de la passion partagée d'une écurie...." Jacky Ickx


Sharknose Hors ligne


Avatar de l’utilisateur
 
Messages: 597
Inscription: Dim 18 Déc 2011 11:01

Messagede Sharknose » Ven 8 Mai 2015 17:06

Beautiful!!!!


erikol Hors ligne

 
Messages: 311
Inscription: Mer 7 Nov 2012 00:23

Messagede erikol » Ven 8 Mai 2015 19:36

toujours la perfection , ajustage et peinture ça fait rêver ....


GTO62 Hors ligne


Avatar de l’utilisateur
 
Messages: 249
Inscription: Lun 29 Sep 2014 22:55
Localisation: Montfoort / Netherlands

Messagede GTO62 » Sam 9 Mai 2015 10:40

Thank you, my friends! :)

In a few weeks, I am going to start again on a project, that stopped 4 months ago.
By a lot of work in my job and rebuilding's in my home, I had no time and space to build.
People who are married, know what I mean. :cry:


ford32deuce Hors ligne


Avatar de l’utilisateur
 
Messages: 4
Inscription: Mer 25 Sep 2019 16:40
Localisation: Québec - Canada

Messagede ford32deuce » Ven 8 Nov 2019 17:27

Elle est superbe bravo.


Dark Hors ligne


Avatar de l’utilisateur
 
Messages: 23262
Inscription: Mar 31 Mai 2011 22:30

Messagede Dark » Dim 10 Nov 2019 07:46

ford32deuce a écrit:
Elle est superbe bravo.



si tu aimes la breadvan.....par ici mon kiki


Image
Image
Image
Image



Retourner vers Montage

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 1 invité