Page 1 sur 1

1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Mar 30 Sep 2014 00:33
de GTO62
A while ago I finished this kit and I like to share some photo's with you of the build and the finished model.

All the resin is very clean and no air bubbles, the line this model is one of the finest I have seen of a Breadvan.
What is in the box:

Image

Image

One chair was missing, but I used the chairs from a 250 GTO of Kyosho.

Image

Wire wheels are spare parts from my own, but after all, I only used the brakes!

Image

Image

Image

After cleaning and sanding the first priming:

Image

Image

A little bit filler:

Image

And then I discovered APM has forgotten to make some holes in the body.
So I carved them in by my self.

Image

Image

Colour and varnish:

Image

Image

During drying time of the body, I began with the interior:

Image

Image

Image

In the interior I used parts of other brands: steering wheel and chairs from Kyosho 250 GTO, seatbelts from MFH and some parts of Tremonia, SMS, Legende Miniatures, Hobby Design and Red Run.

Image

Tyres are from Kyosho 250 GTO and wire wheels are from BBR.
To fit the tyres I had to widened the wire wheels.

Image

The brakes of APM were not correct, so I changed them a little bit to fit the wheels.

Image

Image

Image

Image

In mean while I polished the body and painted the inside.

Image

Image

Image

Now we can finish the rest of the body:

Image

Image

Image

Image

Image

When the exterior is finished, we can build in the interior and the rest:

Image

Image

And then, on a beautiful sunny day, it was time for the final pictures:

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image


I hope you liked the build and the final result.
Thanks for watching! :)

John

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Mar 30 Sep 2014 05:44
de Dark
A very mature and professionnal building.......

Paint and caved traps.. :: :roll:

This kit is very good quality conception

But is réalisation is very délicat

I think about the glass...for exemple

Congratulations John

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Mar 30 Sep 2014 18:46
de Antoine
In french : finition exemplaire !

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Mar 30 Sep 2014 19:41
de Scuderia57
Antoine a écrit:
In french : finition exemplaire !



+1 ;)

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Mar 30 Sep 2014 19:51
de Xaneaze
Great and terrific !!
Very fine work ;)
This is not modelling but jewelry ;)

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Mar 30 Sep 2014 22:54
de GTO62
Thank you guys! :)
It's always take a lot of time and patience to build a nice model.
One of the most important things is dry-fitting, but I think the most builders know that.

The kit was very nice, smooth resin and good quality PE-material.
But there are always some parts in different kits from APM, witch are not so good.
In most kits of APM the wheels or tyres are to small, I am always searching for a solution.
In this kit there were a few parts I did not like, so I used a lot of parts of a 250 GTO from Kyosho.
And sometimes you must make the parts by yourself.

John

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Mer 1 Oct 2014 03:01
de Dark
Dry fitting :?:

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Mer 1 Oct 2014 08:53
de GTO62
Dark a écrit:
Dry fitting :?:


To put everything together before you going to paint or glue. ;)

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Mer 1 Oct 2014 19:14
de ayrton83
John fantastic job. zero defaults, you're very talented ;)

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Jeu 2 Oct 2014 05:52
de Dark
GTO62 a écrit:
Dark a écrit:
Dry fitting :?:


To put everything together before you going to paint or glue. ;)




Ok ......ok....thx ... ;)

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Dim 23 Nov 2014 20:50
de stef17
What a beautifull model :!: and you have done it with a great talent I'm fan of your job :D

A+
Stéfan

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Mer 10 Déc 2014 21:24
de b12cky
Fantastic job!

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Mer 10 Déc 2014 22:00
de Chris06
b12cky a écrit:
Fantastic job!


I like this...!

Image

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Jeu 11 Déc 2014 22:21
de Xaneaze
Chris06 a écrit:
b12cky a écrit:
Fantastic job!


I like this...!

Image


hum that's the way, I like it !! 8-) 8-)
https://www.youtube.com/watch?v=83I9El6C47A

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Ven 8 Mai 2015 17:06
de Sharknose
Beautiful!!!!

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Ven 8 Mai 2015 19:36
de erikol
toujours la perfection , ajustage et peinture ça fait rêver ....

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Sam 9 Mai 2015 10:40
de GTO62
Thank you, my friends! :)

In a few weeks, I am going to start again on a project, that stopped 4 months ago.
By a lot of work in my job and rebuilding's in my home, I had no time and space to build.
People who are married, know what I mean. :cry:

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Ven 8 Nov 2019 17:27
de ford32deuce
Elle est superbe bravo.

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Dim 10 Nov 2019 07:46
de Dark
ford32deuce a écrit:
Elle est superbe bravo.



si tu aimes la breadvan.....par ici mon kiki


Image
Image
Image
Image

Re: 1:18 APM full-kit 250 GT "Breadvan"

MessagePosté: Mar 25 Fév 2020 22:17
de Antoine
Retour vers le futur...