Page 1 sur 1

Ferrari 612 Can Am

MessagePosté: Lun 1 Fév 2016 18:53
de GTO62
CMF 1:18 Ferrari 612 Can Am

Image

Image


Spoiler is taped at the back on the base.


Image


And yes, CMF was so kind to send me again the nr. 01 of 100 pieces! (red version) ;)


Image


Well my friends, body looks good, nice paint, but there are some things which need a little attention.
Wheels looks like sh*t! :?

-------------------------------------------------------------------------------------------------------------------------------------------

So, we started with the wheels, because they have a strange gold-colour and I don't like the shape of them.
I always like polished wheels, so I search for some alu-rims and found also some wheels of a 365 GTB.
I rebuild the wheels of the 365 to fit into the alu-rims.


Image


For those people, who want also to rebuild there 612, but want to safe the original wheels of this 612, be very careful, the hart of these wheels are very fragile and will brake very fast.


Image


With the original wheels of the 612, I've made my alu-rims longer.


Image

Image


Official there are 5 wheelnuts on every wheel, but I choose to place only one central wheelnut.

Dashboard: Steeringwheel looks like sh*t, so I used some spareparts of my own.


Image


I cut out the hart of this new steeringwheel and replaced it by a PE part.
Need still some work before painting.


Image


Engine: Now it's going to be difficult to explain in English, but the pictures will tell the story.


Image

Image

Image


Cut it out nice and round and yes, this looks better then the originals of CMF.
Still 11 to go!


Image

Image


Image


Maybe they are a little bit to large for this model, but I do not want to do anything at the engine.
CMF uses a sort of resin, which is very hard and will break easily.
Things will break always on that spots where you don't want it.
I don't want to do a new paintjob on this model, so I leave the engine for what it is.


Image


Finished the steeringwheel and placed it in the dashboard.


Image


Wheels are already glued under the body, so we can put the model back together again.

Model is finished and between the storm over here, I have made some pictures of it. :D


Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image


Thanks for watching! 8)

Re: Ferrari 612 Can Am

MessagePosté: Lun 1 Fév 2016 21:45
de Antoine
Ouch !

Re: Ferrari 612 Can Am

MessagePosté: Lun 1 Fév 2016 22:11
de Dark
The Magic touch .......one Word ....magnifique ......

Re: Ferrari 612 Can Am

MessagePosté: Mar 2 Fév 2016 00:16
de GTO62
Thanks guys, but my touch was not so magic..............., because I have made a terrible and very stupid mistake. :oops:

I have placed the spoiler wrong on the model, it must be turned around!

I have not seen, that you must bend the legs of the spoiler to the middle.


Image


When you do this, everything is fitting better and the spoiler stands correct now. :)


Image

Image

Image

Image

Image


So, no problems anymore, everybody satisfied ? 8-)

Re: Ferrari 612 Can Am

MessagePosté: Mar 2 Fév 2016 06:48
de Dark
Je l'aurais mis dans le même sens que toi ....maintenant...il me semble à l'envers

Comme quoi ....il faut bien faire attention à son instinct : :mrgreen:


I had put The spolier ...In The same way that you John

And it look wrong for me...now.....

We must be carful... of ours instinct

Re: Ferrari 612 Can Am

MessagePosté: Mar 2 Fév 2016 19:28
de Scuderia57

Re: Ferrari 612 Can Am

MessagePosté: Mar 2 Fév 2016 22:53
de GTO62
Thanks Scuderia, I know this article.

This model is awesome, a full scratch build! 8-)

Re: Ferrari 612 Can Am

MessagePosté: Mer 3 Fév 2016 09:35
de Xaneaze
Great model to purchase...but with your modifications, the car looks brilliant !!

Re: Ferrari 612 Can Am

MessagePosté: Mer 3 Fév 2016 09:45
de GTO62
Xaneaze a écrit:
Great model to purchase...and with your modifications, the car looks brilliant !!


Thank you! :)

Re: Ferrari 612 Can Am

MessagePosté: Sam 6 Fév 2016 11:23
de ayrton83
beautiful , I want it !